Kuhn Altor 4560 Agricultural Catalog - English

S P E C I F I C AT I O N S Body capacity Unladen weight m3 kg Width Inside body dimensions Length Height Width with chute retracted -1 ALTOR 4560 Standard Remote cables or electric 285/70 R19.5 1 kW(hp) kW(hp) l/min/bar ALTOR 4560 with Mixing hopper 4 3 360 1.40 2.30 1.16 2.30 3.03 2.30 5.17 5.17 2.45 3.25 0.61 1.07 18 1.46 1.93 1.80 1.35 1.20 x 1.20 x 2.50 270/540 Electric 285/70 R19.5 1 37 (50) 51 (70) 45/180 To protect the environment, This leaflet is printed on chlorine – free paper / Printed in France – A7322442 – 07.05 – KHUN 2005 – Imp Goubault ALTOR 4560 Silage Cutter, Straw Blower & Feeder A range of options to suit your farm 4 Hydraulic power unit A 45 l/min hydraulic pump will render the machine independent of tractors with a low oil flow rate.

Loading times will be minimised. Built into the machine structure, the hydraulic power unit is protected from knocks while the machine is travelling around the farm. Width with chute deployed Overall dimensions Outside width at wheels Length without platform Length with platform Horizontal machine height* Silage cutting height (machine on ground) Feeding height** (machine on ground) Feeding height** (machine at full height) Straw blowing distance with standard chute Straw blowing height** (machine on ground) Straw blowing height** (machine at full height) Diameter of round bales Max. width of round bales 8 9 Max. size of rectangular bales Turbine speed Type of control Safe loading platform For small-sized tractors, the platform can be used to load the machine safely and efficiently 8. Both versions of the Altor 4560 (with or without a mixing hopper) can accommodate the loading platform. The platform is equipped with a dual electric control 9. 575 litre mixing hopper The 575 l mixing hopper is incorporated perfectly into the front of the machine. The hopper is loaded effortlessly and safely 10. thanks to its extra-low profile and two loading doors (right and left). Minerals and concentrates are mixed in the hopper by means of an agitator consisting of a double reverse-pitch coil. The ingredients are premixed prior to injection 11. The auger, activated by operation of the feed rotor, injects the concentrates at the bottom of the turbine for a perfect blend with coarse fodder (in 3/4 of a turn). The supplementation can be adjusted at any time simply by modulating the speed of the injection auger. 10 11 Tyres for abrasive ground Number of feed rotors Recommended tractor power Recommended tractor power for haylage Tractor output and pressure requirement * Depending on tractor and tyres (turbine 250 mm from the ground) 37 (50) 51 (70) 30/180 ** Height measured at the end of the chute bottom plate OPTIONAL EQUIPMENT*** Mixing hopper Loading height (machine on ground) Loading height (machine horizontal)* Swivel chute 300° Height (machine on ground with chute retracted) Height (machine on ground with chute extended) Straw blowing distance Hydraulic power unit Output Reservoir capacity l/min l 45 45 45 45 m m m 2.31 2.45 13 m m 1.43 1.50 2.31 2.45 13 Swivel chute for 300° straw blowing The Altor 4560 can be equipped with a swivel chute 12 to blow straw to the left and right of the machine. This chute is the solution to straw blowing in buildings with no separate exit or with difficult access. The swivel chute is mounted on a turntable for 300° rotation 13. The machine operator can blow straw up to a distance of 13 m simply using the fingertip controls in the cab. The standard right-hand-side chute can be switched to a swivel chute by means of a hydraulically-driven flap, again from the tractor cab. The flap position can be checked at any time from an indicator mounted on the turbine. Platform with dual controls for electric version Wide-angle PTO shaft